 |
|
|
|
|
|
|
|
|
|
|
 |
Datasheet : Glo Brite protection lacquer WR |
| Return to main photoluminescent coatings page |
Description :
One component weather resistant lacquer with UV filter.
|
|
Recommended use :
Protection lacquer for use on top of all Glo Brite safety coatings.
|
|
| Physical constants :
|
| Flash point |
Over 32 degrees C |
| Finish |
Clear and glossy |
| Solids by volume |
27% |
| Practical spreading rate |
10 square metres per litre |
| Drying time |
2 hours at 20 degrees C / 68 degrees F |
| Recoating time |
Approximately 2 hours |
| Shelf life |
1 year in dry place above 5 degrees C |
|
| Application details :
|
| Conventional spray/brush |
1 coat @ 100 microns WFT |
|
| For best results it is recommended that 2 coats be applied when using brush. |
|
| Return to main photoluminescent coatings page |
|
|
 |
|
 |
|
|
|
Glo Brite Photoluminescent Products Ltd, 530 Woodbridge Road, Ipswich, Suffolk, IP4 4PN, England
Tel : (01473) 721561 - Fax : (01473) 714069 - Email : sales@globritephotoluminescent.com
http://www.globritephotoluminescent.com - Copyright © 2008 Glo Brite Photoluminescent Products Ltd
GLO BRITE Photoluminescent material is manufactured by, and is the trademark of, Glo Brite Photoluminescent Products Ltd.
|
|
|
|
|
